Acrosser AR-B9612 - Manual (Page 18)

AR-B9612 User’s Guide
2-13
2.9 FLASH DISK
The AR-B9612 provides three 32-pin JEDEC DIP sockets may
be populated with up to 1.5MB FLASH. It is ideal for diskless
system, high reliability and/or high speed access applications,
controller for industrial or line test instruments, etc.
2.9.1 Configuration
FLASH function enables you to use 5V FLASH, allowing you to
directly program the ROM disk without having to purchase any
additional programming equipment to write or erase data. If
small page (less or equal 512 bytes per page) 5V FLASHs are
used, you can format FLASH disk and copy files onto FLASH
disk just like using floppy disk. If you would like to update 1
or more files to FLASH disk, you just copy these files onto
FLASH disk, you don’t need to re -program the FLASH disk.
If you are not going to use the solid state disk (SSD), you can
use BIOS setup program to disable the SSD BIOS. The
AR-B9612 will not occupy any memory address if the SSD BIOS
is disabled.
If you are going to install the EMM386.EXE driver, please use
the [X] option to prevent EMM386.EXE from using the particular
range of segment address as an EMS page which is used by
AR-B9612. For example, write a statement in the
CONFIG.SYS file as follow: (If the memory configuration of
AR-B9612 is C800:0)
DEVICE=C:\DOS\EMM386.EXE X=C800-CBFF