Acrosser AR-B1042 - Manual (Page 26)

AR-B1042 User s Guide
4-4
If you have previously installed a driver different from the TurboDLD driver, please note the following:
After installing the TurboDLD Classic, when running the Render Command, AutoCAD R12 will take you into
AVE_RENDER to reconfigure Render for your new driver.
4.1.4 Lotus 1-2-3 Lotus Symphony
These drivers are designed to work with Lotus 1-2-3 Version 2.0, 2.01 and 2.02, and with Lotus Symphony Version
1.0 and 1.1.
To install the Lotus drivers, follow this procedure:
Step 1 : Place Display Driver Diskette#1 into drive A. Make A the default drive by typing A:<ENTER>. Run
the SETUP program by typing SETUP <ENTER>. Press any key to display a list of supported
applications. Use the arrow keys to select Lotus/Symphony and press <ENTER>. A list of
supported screen resolutions will be displayed. Use the arrow keys to select the desired screen
resolution and press <ENTER > (make sure your monitor is able to display the resolution desired).
Press <END> to begin the driver installation process. A default drive and directory path will be
displayed. Use the backspace key to erase this default and type in the 123 directory. At this point
you may be prompted to insert one of the other driver diskettes. You also may be asked to create
the target directory if it does not already exist. After the files have been installed, press any key to
return to the list of supported applications. Press <ESC> followed by Y to exit to DOS. Copy all the
files that were just created on the temporary directory onto a formatted floppy diskette.
Step 2 : Go to your 123 directory and start the installation program. Type the following commands:
C:<ENTER>
INSTALL <ENTER>
Step 3 : The Lotus installation program will load and present the installation menu. From this menu, select
Advanced Options. From the Advanced Options menu, select Add New Drivers To Library From the
Add New Drivers Menu, select Modify Current Driver Set. From the Modify Driver Set Menu, select
Text Display. From the Text Display menu, select one of drivers.
Step 4 : After the selection of the appropriate VGA display driver, you will need to exit this menu and return to
the Main Lotus Installation Menu. Do this by selecting Return to Menu.
Step 5 : At the Main Lotus Installation Menu, select Save Changes
Step 6 : At this point the Installation Menu will prompt you for the name of your new Lotus configuration file.
The Lotus system will prompt you with the default value 123.SET. You do not have to use this
name, however. You may want to use a filename that indicates the resolution of the driver it
contains. For example, if you installed the 123 column by 25 line driver, you could name this driver
132x25. SET. Or if you installed the 80 by 50 driver, you many want to call the file 80x50.SET.
Step 7 : The installation of your Lotus 1-2-3 driver is now complete. You will need to exit the Lotus
installation program at this point. At the main Lotus Installation Menu, select Exit.
NOTE: If you use a different name of the driver set than 123.SET, you have to remember to place the
filename of your driver set on the command line when you start Lotus 1-2-3. For example, if you
named your driver set 132x25.SET, give the following command to start Lotus 1-2-3:
123 132x25.SET <ENTER>