Acrosser AR-B1042 - Manual (Page 29)

AR-B1042 User s Guide
4-7
4.3 THE CHIPSCPL UTILITY PROGRAM
This utility program is designed to work with Microsoft Windows Version 3.1.
4.3.1 Installing the Utility
CHIPSCPL.CPL is a Windows based utility to select resolutions and color depth. It is a control Panel Applet with
its own icon that is automatically installed when installing Chips Windows 3.1 Linear drivers. The Control Panel
icon is in the Main Windows group. To invoke the control panel applet, simply click on the icon. The driver
resolution and color depth take effect only after Windows is rebooted with the new driver.
4.3.2 How to Use the Utility
SCREEN SIZE <ALT S> allows you to select from the following resolutions:
•
640x480
•
800x600
•
1024x768
•
1280x1024
By selecting the resolution first, it will determine the allowable selections for color depth.
COLOR <ALT O> allows you to select the number of colors from the following:
•
16 (4 bits per pixel)
•
256 (8 bpp)
•
32K (15 bpp)
•
64K (16 bpp)
•
16M (24 bpp)
By selecting the color depth first, it will determine the allowable selections for resolution.
DPI <ALT P> allows you to select a large or small font.
DISPLAY <ALT D> allows you to select the display type from the following:
•
CRT only
•
LCD (Flat Panel) only
•
Both CRT and LCD (Flat Panel)
MONITOR SELECTION <ALT M> allows you to select from the list of monitors.
REFRESH <ALT R> allows you to select the refresh rate from the following:
•
Interlaced
•
56 Hz
•
60 Hz
•
70 Hz
•
72 Hz
•
75 Hz
The refresh rate is available on CRT Mode only. The refresh rates supported by the selected monitor are the only
available refresh rates that can be selected.
CURSOR-ANIMATION <ALT A> allows you to select an animated cursor instead of the hour glass wait cursor.
BIG CURSOR <ALT G> allows you to select a big cursor for better visibility on the Flat Panel.