Daewoo 51M200A - Manual (Page 17)

17
FIRST
TIME
USE
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5
1.
Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the
Projection Monitor below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the VID4 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically
after approximately four seconds.
NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
P
B
P
R
P
B
P
R
Y
R (MONO)/L
S-VIDEO
S-VIDEO
Y/VIDEO
R (MONO)/L
R (MONO)/L VIDEO
VIDEO
R L VIDEO
INPUT1
INPUT2
INPUT3
INPUT4
AUDIO
AUDIO
AUDIO
AUDIO
TO HI-FI
VCR
OUTPUT
R L V
S-VIDEO
S-VIDEO R (MONO)/L
INPUT4
MONITOR
OUT
L
R
DVI-HDTV