Daewoo 51M200A - Manual (Page 39)

39
ON-SCREEN
DISPLA
Y
ASPECT
Aspect Mode
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Press CURSOR ̆, ̄, ̇ and ̈ to select menu item.
Press the SELECT button to select. A “ ͱ” in the box indicates that the feature is ON.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press CURSOR ̆ or ̄ to select menu item.
Press CURSOR ̇ or ̈ to adjust the function.
Press EXIT to quit the MENU, or select ASPECT to return to the main menu.
Use this function to select the Picture Format Aspect Ratio (SIZE).
NOTES: 1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on composite video, S-Video, and 480i component signals.
3. See page 23 for Aspect Mode availability.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Locks
Aspect
Audio
Video
Move SEL Sel
Setup
0
Move SEL Return
Mode
16:9 Standard
16:9 Zoom
4:3 Standard 4:3 Expanded
4:3 Zoom1 4:3 Zoom2
Auto Aspect
Aspect
Vertical Position
MENU
SELECT
or