Acrosser AR-V5403FL - Manual (Page 42)

Revision: 1.0
42
6.4 Peripherals Setup
This option controls the configuration of the board’s chipset. Control keys for this screen
are the same as for the previous screen.
Option Choice Description
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Serial Port 3
Onboard Serial Port 4
Serial Port 1: 3F8 / IRQ4
Serial Port 2: 2F8 / IRQ3
Serial Port 3: 3E8 / IRQ11
Serial Port 4: 2E8 / IRQ10
Select an address and the corresponding
interrupt for each serial port.
USB Controller
Enabled
Disabled
Select Enabled if your system contains
a Universal Serial Bue (USB)controller
and you have USB peripherals
USB 2.0 Controller
Enabled
Disabled
Select Enabled if your system contains
a Universal Serial Bue (USB) 2.0
controller and you have USB
peripherals