Denon DN-C635 - Manual (Page 6)

6
ENGLISH
CAUTION:
• Whenever the power operation switch is in the
OFF state, the apparatus is still connected on AC
line voltage.
• The DN-C635 will work normally when the player
unit is mounted with the front panel within 10
degrees of the vertical plane. If the unit is tilted
excessively, discs may not load or unload
properly.
DN-C635
Max. 10°
2 PART NAMES AND FUNCTIONS (Refer to page 3.)
(1) Front panel
q Power operation switch (POWER)
• The power turns on when the button is
switched from the off position ( £ ) to the on
position ( ¢ ).
• The power turns off when the button is
switched from the on position ( ¢ ) to the off
position ( £ ).
w Disc holder
• The disc placed on this holder. Pressing the
disc holder OPEN/CLOSE ( 5 ) button e will
open and close the holder.
When loading the CD, place it securely in the
disc holder.
e Disc holder open/close button
(
5 OPEN/CLOSE)
• Press to load or eject the disc. Each press will
open or close the disc holder w.
r Remote control sensor
(REMOTE SENSOR)
• About the wireless remote control unit : Please
contact local dealer or distributor.
t Display
• Refer to page 8 for details.
y PLAY button ( 1 )
• Use this to start playback.
u STOP button ( 2 )
• Press this button to stop playback.
i PAUSE button ( 3 )
• Use this pause playback.
o CUE button
• When pressed during playback, the pickup
returns to the position at which playback last
started and the pause mode is set.
• When pressed during manual search, the
pause mode is set at that position.
• When pressed while the disc holder is open,
the disc holder closes and the pause mode is
set.
!0 Select knob ( 8 , 9 )
• Turn the knob clockwise by one click to move
one track forward, counterclockwise by one
click to move one track backward.
• When the knob turned while pressing it in, one
click corresponds to 10 tracks.
• In the preset mode, use this knob to set and
enter preset settings.
!1 !2 Search button ( 6 , 7 )
• These buttons are used to accurately change
the positions where playback will start.
!3 PLAY MODE button
• Press this button to switch the play mode.
!4 END MON button
• Press this button in the standby mode to
monitor the end of the track. (End Monitor)
✽ In the MP3 play mode, the time of monitor may
not be correctly.
!5 PITCH button
• Press this button to switch to the play speed
set with the Pitch Slider. The PITCH LED
flashes.
• When the button is pressed again, the fixed
pitch mode is set and the PITCH LED lights.
• Press the button again to cancel the pitch play
mode and return to normal speed.
– TABLE OF CONTENTS –
z Features..............................................................6
x Part names and functions ..............................6~8
c Connections........................................................8
v Opening and closing the disc holder
and loading a disc ...............................................9
b Normal CD playback ...........................................9
n Advanced CD playback...............................10, 11
m Playing MP3 files .......................................11~13
, The compact disc .............................................13
. Power on playback ...........................................13
⁄0 Expanded function......................................13, 14
⁄1 Before switching off the power .......................14
⁄2 Preset functions and operations ................14~16
⁄3 Troubleshooting ................................................16
⁄4 Specifications ...................................................17
2 ACCESSORIES
Check that the following parts are included in
addition to the main unit:
q Operating instructions ......................................1
w Connection Cords ............................................1
1 FEATURES
2 99-track programming play
2 ±12 % Variable pitch playback
2 CD-R/RW playback
2 CD TEXT
2 MP3 playback
2 19 inch Rack Mountable (Height 2 U)
2 Track Search Select knob (Easy track selection)
2 Play mode and Finish mode
(1) Play mode
q Continuous: Play a whole disc.
w Single: Play a track.
(2) Finish mode (Stop, Next, Recue)
q Stop: Stop after finishing to play a track.
w Next: Standby at the beginning of next
track after finishing to play track.
e Recue: After finishing to play a track,
standby at the beginning of the track.
2 Auto Cue
After a disc is loaded, it is automatically cued to the
point where audio starts.
Cueing takes place at the point where audio starts
rather than where the track starts. The level at
which sound is first detected can be set between
–36 to –48 dB (3 steps).
2 End Monitor
Pressing the END MON button during standby
instantly previews the end of the track, thus
assuring perfect “end point”. The point at which
monitoring starts can be set within a range of 5 to
35 seconds (7 steps) prior to the track’s end.
✽ In the MP3 play mode, the time of monitor may
not be correctly.
2 End of Message (EOM)
At the end of the track, the time display flashes,
providing a visual warning to the operator that the
track will end shortly. The point at which the
flashing beings can be set within a range of 0 to 60
seconds (7 steps) prior to the end of the track.
2 FL Display
2 Display of Playback Locations
A bar graph display indicates playback points on
the track being played. Elapsed time and
Remaining time displays are switched using the
TIME button.
2 External control Terminals
Parallel Remote (D-sub 25 pin)
Serial Remote (D-sub 9 pin)
2 Cascade playback
2 Power on playback
2 INTRODUCTION
Thank you very much for purchasing the DENON
component CD / MP3 player.
DENON proudly presents this advanced CD / MP3
player to audiophiles and music lovers as a further
proof of DENON’s non-compromising pursuit of the
ultimate in sound quality. The high quality performance
and easy operation are certain to provide you with
many hours of outstanding listening pleasure.