DeLonghi EC710 - Manual (Page 8)

2. With one hand, hold the cappuccino tube firmly and with the
other unscrew the cappuccino maker itself by rotating clockwise
and extracting downwards (fig. 23).
3. Remove the nozzle from the steam tube by pulling it downwards
(fig. 24). Note: Metal of steam pipe may be hot!!!
4. Wash the cappuccino maker and steam nozzle thoroughly with
warm water.
5. Make sure the two holes indicated by the arrows in fig. 25 are not
blocked. If necessary, clean with a pin.
6. Replace the steam nozzle by inserting it onto the steam tube and
rotating firmly towards the top of the tube.
7. Replace the cappuccino maker by inserting it and rotating anti-
clockwise.
HOT WATER PRODUCTION
1. Turn the appliance on by pressing the ON/OFF button (fig. 3).Wait
until the OK indicator light comes on (fig. 5).
2. Place a container under the cappuccino maker.
3. Press the coffee button (fig. 6) and at the same time open the
steam knob. Hot water is delivered from the cappuccino maker.
4. To interrupt the flow of hot water, close the steam knob by rotating
clockwise and press the coffee button again.
fig. 23
fig. 24
fig. 25
Coffee Maker 8