Amplicom PowerTel 760 Corded Telephone w/Answering Machine - Manual (Page 29)

1-866-AMPLICOM (267-5426) 29
Set the answer mode
Choose the answer mode: Answer & Record or Answer only. With the machine
in Answer only mode, callers will not be able to leave a message.
1. Press
STOP
to switch the answering machine on.
2. To change the mode between Answer & Record, Answer Only or
Answer Off, press and hold
STOP
for two seconds.
Check the outgoing message
Press
REDIAL/P
CID/FLASH
OGM MEMO
to hear the current outgoing message.
Record an outgoing message
The outgoing message must be less than two minutes long. To change the
default answering message:
1. Press and hold
REDIAL/P
CID/FLASH
OGM MEMO on the base for two seconds. Record the new message
after the beep.
2. To stop recording, press
STOP
. To listen to the recorded message, press
REDIAL/P
CID/FLASH
OGM MEMO
.
Note: to return to the default message, press and hold DEL
MUTE
while the outgo-
ing message is playing.
a
nswerinG
m
aChine