Amplicom PowerTel 760 Corded Telephone w/Answering Machine - Manual (Page 48)

Service Center 48
Change a profile’s handset volume or equalizer
1. Open the menu by pressing MENU , then scroll using
REDIAL
TONE
CID
OGM MEMO
or
REDIAL
TONE
CID
OGM MEMO
until you
highlight Profile and press B or OK.
2. Scroll using
REDIAL
TONE
CID
OGM MEMO
or -until Profile 1 or 2 is highlighted, press B or OK.
3. Scroll using
REDIAL
TONE
CID
OGM MEMO
or
REDIAL
TONE
CID
OGM MEMO
until the desired setting is highlighted, press B or
OK.
4. The current setting will be displayed.
5. Change the appropriate setting using
REDIAL
TONE
CID
OGM MEMO
or
REDIAL
TONE
CID
OGM MEMO
and press B or OK.
Note: Press
to exit the menu and return the handset to standby.
Choose a profile to use
Note: Handset must be used to choose a profile for a call – a profile cannot
be chosen using handsfree.
1. Before or after answering an incoming call, press the PROFILE button on
the left side of the handset to select either profile M1 or M2 or Profile OFF.
2. The display will confirm your choice.
m
enu
o
ptions
- C
ordless
p
hone