AMT Datasouth M5TT Plus - Manual (Page 26)

Document #120522 Rev-A 23
3.9 Install Memory Card
1. Turn the printer upside down.
2. Remove the screw that fixes the memory card cover.
3. Plug in the memory card on main board.
M5 Model (Option) M5 PLUS Model (SD Card)
4. Close the memory card cover.
* Recommended SD card specification.
SD V 1.0, V 1.1 SD V 2.0 (SDHC)
128MB
256MB
512MB
1GB
4GB class 6
-Supported DOS FAT file system.
-Folders stored on the SD card should be in the 8.3 filename format.
-Approved SD card manufacturer: SanDisk, Transcend.
Memory Card Cover
Screw