Avalue ECM-LX800W - Manual (Page 21)

User ’s Manual
ECM-LX800W Series User ‘s Manual 21

Locate the DIMM socket on the board.

Hold two edges of the DIMM module carefully. Keep away of touching its connectors.

Align the notch key on the module with the rib on the slot.

Firmly press the modules into the socket automatically snaps into the mounting notch.
Do not force the DIMM module in with extra force as the DIMM module only fit in one
direction.

To remove the DIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the DIMM module.
Note:
(1) Please do not change any DDR SDRAM parameter in BIOS setup to increase
your system‘s performance without acquiring technical information in advance.
(2) Static electricity can damage the electronic components of the computer or
optional boards. Before starting these procedures, ensure that you are
discharged of static electricity by touching a grounded metal object briefly.
Mounting Notch Notch Key
Ejector
Tab
200-pin DDR DIMM