Avalue ECM-LX800W - Manual (Page 63)

User ’s Manual
ECM-LX800W Series User ‘s Manual 63
3.5.8 PnP / PCI Configuration
This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed
the CPU itself uses when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
3.5.8.1 PNP OS Installed
The operation system environment is Plug-and-
Play aware sets ―YES‖
Options are: No, Yes.
3.5.8.2 Init Display First
This item allows you to decide to active whether PCI Slot or AGP first.
Options are: PCI Slot, Onboard.
3.5.8.3 Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot
and Plug and Play compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows

95. If you set
this field to ―manual‖ choose specific resources by going into each of the sub menu that
follows this field (a sub menu is preceded by a ―‖).
Options are: Auto(ESCD), Manual.