Q-See QSD2216 - Manual (Page 12)

12
4. REMOTE CONTROLLER
0 – 9, 10+: Select the channel (Full screen)
2x2: 2x2 Screen Modes
3x3: 3x3 Screen Modes
4x4: 4x4 Screen Modes
USB: USB Storage Backup
AUTO: Auto Sequence Mode
ZOOM: 2X Zoom
FREEZE: Freeze
DISPLAY: Hard Disk Information
MENU/EXIT: System Setup
SEARCH: Time Search, Event Search and Start Stop Search
ENTER: Enter Next Menu
REC: Record
WM: Watermark set
PTZ: Control Speed dome
5. SYSTEM SETUP
Before using the video recorder, the first step is to set up the system according to user’s needs;
otherwise the machine will run with the default settings.
5.1 SETUP MENU
When in setup mode, press upward button or downward button, the cursor will move among
the settable items, continuous pressing will make the cursor move among the options one by
one, and it can recur. The selected one will display in yellow color.
While choosing digital fields, e.g. year, month, day, hour, minute, second etc, press
leftward button or rightward button, the cursor can move leftward or rightward among
The several digits of one field, continuous pressing will make it move among digits one by one,
and it can recur.
Please press leftward or rightward button to change the value that the cursor on,
Press “ENTER” button to enter sub menu and press menu button to return to previous menu.
Long press the menu/search button on the keyboard or press the remote controller to enter the
Setup Main Menu. You can show password input box according setting of password set. If you
fault password input 3-times, then you can’t enter the setup menu. Default password is “0000”,