Q-See QSD2216 - Manual (Page 27)

27
5.7 SCHEDULE SET
When the cursor moves to Schedule Set, press the Enter button, and the schedule setup
window will appear.
You can change a recording schedule during a day by using this setup window.
Please note: Military time must be used.
START: start record time
STOP: stop record time
SCHEDULE ENABLE: must set to “on”, if want to enable schedule record function
Note: Manual record mode and schedule record mode (including motion detection
record mode, sensor record mode and time schedule record mode) can not be used at
the same time. Once the user selects Schedule record mode, manual record mode will
disabled; once user select manual record mode, schedule record mode will be
disabled.
5.8 USB BACKUP
Set the USB BACKUP.
Plug in the USB device, and press “ENTER” button, you can see the below picture.
There are two types of backup mode: STILL and MOVIE, in STILL mode you can backup Picture
and in MOVIE mode you can backup video.