Avalue EMX-H61B - Manual (Page 38)

EMX-H61B User ’s Manual
38 EMX-H61B User’s Manual
Item Options Description
Console Redirection
Disabled
Enabled[Default]
Console Redirection Enable or Disable.
Console Redirection Settings
The settings specify how the host computer and the remote computer
(which the user is using) will exchange data. Both computers should have
the same or compatible settings.
3.6.2.9.1 Console Redirection Settings
Item Options Description
Out-of-Band Mgmt Port COM0[Default]
Microsoft Windows Emergency Management.
Services (EMS) allows for remote management of a
Windows Server OS through a serial port.
Terminal Type
VT100
VT100+
VT-UTF8[Default]
ANSI
VT-UTF8 is the preferred terminal type for
out-of-band management. The next best choice is
VT100+ and then VT100. See above, in Console
Redirection Settings page, for more Help with
Terminal Type/Emulation.
Bits per second
9600
19200
57600
115200[Default]
Select serial port transmission speed. The speed
must be matched on the other side. Long or noisy
lines may require lower speeds.
Flow Control
None[Default]
Hardware RTS/CTS
Software Xon/Xoff
Flow control can prevent data loss from buffer
overflow. When sending data, if the receiving buffers
are full, a
‘stop’ signal can be sent to stop the data
flow. Once the buffers are empty, a ‘start’ signal can
be sent to re-start the flow. Hardware flow control
uses two wires to send start/stop signals.