Listing approvals, Product dimension specifications, Safety information – Desa CEF26BN User Manual

Page 3

Advertising
background image

www.desatech.com

116863-01B

3

22.75

26.125

21.26

21.125

13.25

12.0

4.33

SAFETY INFORMATION

Continued

10. To prevent possible fire, do not block air

intakes in any manner.

11. A heater has hot and arcing or sparking parts

inside. Do not use it in areas where gasoline,

paint or flammable liquids are used or stored.

12. Use this heater only as described in this

manual. Any other use not recommended

by the manufacturer may cause fire, electric

shock or injury to persons.

13. Avoid the use of an extension cord because the

extension cord may overheat and cause a risk of

fire. However, if you have to use an extension

cord, the cord should be No. 14 AWG minimum

size and rated not less than 1875 WATTS.

14. Always use properly grounded fused and

polarized outlets.

15. Always use ground fault protection where

required by electrical codes.

16. Always disconnect power before performing any

cleaning, maintenance or relocation of heater.

17. To prevent a possible fire, do not burn wood

or other materials in this heater.

18 To prevent electric shock or fire, always use

a certified electrician should new circuits or

outlets be required.

19. When transporting or storing heater, keep in

a dry place free from excessive vibration and

store as to avoid damage.

LISTING APPROVALS

This heater has been tested in accordance with the

CSA Standards for fixed and location-dedicated

electric room heaters in the United States. All

components are UL or CSA safety certified.
If you need assistance during installation, please

contact your local dealer or the DESA Heating

Products Technical Services Department at

1-866-6040.

Model:

CEF26BN

Description:

26" Fireplace/Insert

Voltage:

120

Watts:

1500

Amps:

15 Amp

Grounded Circuit

PRODUCT DIMENSION

SPECIFICATIONS

Figure 1 - Heater Dimensions

Note:

This heater must be electrically wired and

grounded in accordance with local codes or, in

the absence of local codes, with National Electric

Code ANSI/NFPA 70-latest edition or the Cana-

dian Electric Code, CSA C2.1

as appropriate.

Advertising