Chapter 2 hardware installation, Installing the processor, 1 installing the processor – Axiomtek IPC932-230-FL-ECM User Manual
Page 25
IPC932-230-FL Series U
ser’s Manual
Hardware Installation
17
The IPC932-230-FL Series are convenient for your various hardware configurations,
such as CPU (Central Processing Unit), Memory Module, HDD (Hard Disk Drive) and
PCIe card. The chapter 2 will show you how to install the hardware. It includes:
The Intel® Core™ i7/i5/i3 processors are available as a boxed processor for IPC932-
230-FL system. Intel recommends the processors should be installed by a computer
professional since this electronic device may cause serious damage to the installer,
system and processor if installed improperly.
Important Notes Before attempting to install a new processor, carefully re view the
documentation that came with your system and make sure that you will not be voiding
your warranty by opening the computer or replacing your processor.
Instructions:
1.
Make
sure
that your system can accommodate the Intel
®
Core
™
i7/i5/i3/Celeron
®
Processors that you want to install. Check for CPU Card, BIOS,
and thermal compatibility by using the manufacturer's documentation for the
system, or by contacting the vendor if necessary. This processor should only be
installed in systems supporting the Intel
®
Core
™
i7/i5/i3/Celeron
®
Processors.
2.
Obtain access to your processor socket as described in the documentation for
your system.
3.
If the cooling solution prevents you from accessing the processor socket, you
may need to remove it. Instructions on how to remove your cooling solution
should be provided in the documentation that came with the system.