Safety precautions – Axiomtek IPC932-230-FL-ECM User Manual
Page 3
iii
Before getting started, please read the following important safety precautions.
1.
The IPC932-230-FL Series does not come equipped with an operating
system. An operating system must be loaded first before installing any
software into the computer.
2.
Be sure to ground yourself to prevent static charge when installing the
internal components. Use a grounding wrist strap and place all electronic
components in any static-shielded devices. Most electronic components are
sensitive to static electrical charge.
3.
Disconnect the power cord from the IPC932-230-FL Series before making
any installation. Be sure both the system and the external devices are turned
OFF. Sudden surge of power could ruin sensitive components. Make sure the
IPC932-230-FL Series is properly grounded.
4.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
5.
Turn OFF the system power before cleaning. Clean the system using a cloth
only. Do not spray any liquid cleaner directly onto the screen.
6.
Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20℃ or above 80℃. It may damage the
equipment.
7.
Do not open the system
’s back cover. If opening the cover for maintenance
is a must, only a trained technician is allowe d to do so. Integrated circuits on
computer boards are sensitive to static electricity. To avoid damaging chips
from electrostatic discharge, observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This will help to
discharge any static electricity on your body.
W hen handling boards and components, wear a wrist -grounding strap,
available from most electronic component stores .