Bonaire 5 Star Silhouette - Manual (Page 7)

E LECTRONIC S ILHOUETTE
Page 7
Operating the Unit
Programming Sequence
1. Touch the program button. The display will show
the day group. To change the day or day group
(Single day, Week days, Weekend or Whole
week) touch the UP/DOWN button to select the
desired day group and touch the SELECT button
to select.
2. The display will flash the period bar at bottom of
the display. Touch the UP/DOWN button to
change the program period and touch the
SELECT button to select. (you can set 4 program
periods in each day)
3. Now the display will flash the hour segment.
Touch the UP/DOWN button to change the start
hour and touch the SELECT button to set.
NOTE: If you want to disable the period, set
time to “--:--”
4. The display will flash the minute segment. Touch
the UP/DOWN button to change the start minutes
and touch the SELECT button to set.
5. Now the temperature bar is flashing. Touch the
UP/DOWN button to increase or decrease the
temperature level and touch the SELECT button
to set.
NOTE: No temperature bar means OFF time.
6. The display will flash the fan speed. Touch the
UP/DOWN button to increase or decrease the fan
speed and touch the SELECT button to set.
When you touch the SELECT button, the controller
will display the main programming screen. To set
another period, touch the SELECT button and follow
the programming sequence from STEP 2.
If the unit is running under Program mode, the user
may temporarily override the programmed settings by
changing the temperature or fan speed level. If the
unit is running under Program mode, touch the
SELECT button to select temperature level or fan
speed level and then touch the UP/DOWN button to
change. In this case, an “Override” icon will appear
on the display.
2
3
4
5
6
1