Custom Autosound Secretaudio SST - Manual (Page 4)

3 12
Power On/Off
Press the POWER button (1) to turn the unit on. The unit will resume the last mode
(Tuner, Aux, etc.). Hold and press this button for 3 seconds to turn off the unit.
Volume Control
To increase the volume, turn the VOLUME knob (4) clockwise. To decrease the volume,
turn the VOLUME knob (4) counter clockwise.
Mute
Short press of the power button (1) will MUTE the sound. A second short press of the
power button will resume audio output.
Mode
Press the MODE button (9) on the control panel to select a different mode of operation,
as indicated on the display panel. Available modes include Tuner, USB, iPod, CD and
AUX In.
NOTE: iPod will be skipped if the module is not installed.
Reset
The reset button should be activated for the following reasons:
• initial installation of the unit when all wiring is completed
• function buttons do not operate
• error symbol on the display
Use a ball point pin or thin metal object to press the RESET button, located on the tuner
box. You can recover factory default settings using the RESUME function located on the
system menu. With “YES” flashing, press the SELECT button (4) to activate.
Audio Menu
menu. You can navigate through the audio menu items by pressing the TUNE/TRK>>| or |<<
Press the AUDIO button (volume knob) (5) on the control panel to access the audio
button(2.3) or pressing the AUDIO button repeatedly . Once the desired menu item appears
on the display, adjust that option by turning the VOLUME +/- control (4) within 5 seconds.
The unit will automatically exit the audio menu after five seconds of inactivity.
The following menu items can be adjusted.
Bass Level Use the VOLUME knob to adjust the Bass level range from “-6” to “+6”.
Treble Level Use the VOLUME knob to adjust the Treble level range from “-6” to “+6”.
Balance Use the VOLUME knob to adjust the Balance between the left and right speak-
ers from “L12” (full left) to “R12” (full right).
Fader Use the VOLUME knob to adjust the Fader between the rear and front speakers
from “R12” (full rear) to “F12” (full front).
Selecting Tracks
During playback, press the TUNE/TRK |<< / >>| button (2/3) to play the previ-
ous or next track in the current category. Press the TUNE/TRK |<< button (2)
once to play the song from the start position or press TUNE/TRK |<< twice to
play the previous track. Press and hold the TUNE/TRK |<< / >>| button (2/3) to
fast reverse/forward the song.
NOTE: If you press and hold the TUNE/TRK |<< / >>| button to change the current
song to the previous/next song, you will exit fast reverse/forward mode.
Alternate Display Information
Press Display button (6) to change the display information in the following
order:
ARTIST NAME > SONG TITLE > FOLDER NAME.
Search Mode
Press and hold the BAND/SEARCH button (8) to enter iPod search mode.
Press BAND/SEARCH again to access Playlist, Artist, Album, Genre, Song, or
Composer (consecutively).
When search mode is selected, press the select button (5) to confirm selec-
tion. Use the VOLUME +/- knob (4) to navigate through various list selections.
Press Select (5) to make your final selection.
USB OR FLASH MP3/WMA OPERATION
This unit supports the USB host function. It can play MP3 and WMA audio for-
mat files stored on USB flash memory and some USB music devices.
NOTE: This unit does not support portable hard discs.
NOTE: Exposure to direct sunlight or high temperatures may cause
deformation or other malfunction of the USB device.
NOTE: Do not remove the USB device during play, as this may result in
loss or damage to data. Always back up and save important data to your
computer.
Accessing USB Mode
Press the MODE button (9) to access USB mode.
• When a USB device is inserted into the USB connector, the unit will auto-
matically switch to USB HOST mode from current playing mode.
• If there are no music files stored on the USB device, the LCD will display
"No File" for 3 seconds and then switch to the previous mode.
• If the unit cannot play the file, the LCD will display "Read Error" for 3 sec-
onds, and then switch to the previous mode automatically.
• If a USB device is not inserted, USB mode will be skipped when pressing
the MODE button.