Da-Lite Tensioned Professional Electrol - Manual (Page 5)

5
Picture Surface
1" x 3" Cleat
2" Moulding
Tensioned Professional Electrol® Installation
Ceiling Mount
Without Hangers
Screen case is placed flush with
the wall and ceiling and held in
position by moulding securely
attached to the wall.
Recessed Above Ceiling
Other methods of installation
will suggest themselves in new
buildings where it would be an
easy matter to provide a recess
for the screen to conceal it when
not in use.
Do not seal in—allow access.
Wall or Ceiling Mount With Hangers
Wall type hangers and ceiling type hangers are
standard equipment. One set is supplied with
each screen. Useful for recessed installations.
Wall Type Hanger
For Exposed Installation
If the screen is to be mounted in an exposed
position, it may be covered with finished
plywood, veneer, paneling, plastic wall covering
or a valance.
Suggested Methods of Installation
Electrical
Outlet Box
9 1/2"
11 5⁄16"
Reinforced
Top
Motor End
Picture
Surface
Picture
Surface
Ceiling Type Hanger
Picture
Surface
Rafters