Da-Lite Tensioned Professional Electrol - Manual (Page 6)

6
Tensioned Professional Electrol® Installation
Screen Adjustment
240 VOLT WIRING DIAGRAM FOR STANDARD WALL SWITCH:
Da-Lite offers two styles of 240 volt wall switches for
standard operation. Please see wiring diagram in wall switch
box included with screen.
Surface travel is stopped automatically in the fully opened and closed positions by limit switches that are properly adjusted at Da-Lite.
CAUTION: Contact Da-Lite at 800-622-3737 or 574-267-8101 if screen motor needs adjustment.
ATTENTION: Contactez Da-Lite au 800-622-3737 ou au 574-267-8101 au cas le moteur de l'écran a besoin d'être ajusté.
Black With
Yellow
To junction box mounted in screen
case, in which interal wiring terminates
in white, black, and red leads.
In multiple control
installations the switch is
replaced by the low
voltage control,
operated
from push
button
stations.
Operating switch,
switch box, and
plate furnished with
screen. (SPDT with
center off)
Up
Down
Side View Of
Switch & Box
AC Common
Green
(Ground)
Red
(Up)
Green (Ground)
AC Hot
115V. AC 60HZ
1 AMP. MAX.
This switch cannot be used with L.V.C.
NOTE: A single switch cannot be used to operate more than one
screen. Contract the factory for further information.
120V Wiring Diagram
Motor
Green (Ground)
Green (Ground)
Black (Down)
Black (Do
wn)
Black
(Down)
Red (Up)
R
ed (Up)
White (Common)
Whit
e (Common)
Off