Da-Lite Model C with CSR - Manual (Page 2)

2
Pre-Installation To Open Screen
To Re-Roll Your Picture Surface
Wall Mounting
Ceiling Mounting
Protect Your Screen
Model C with CSR (Controlled Screen Return) is a feature offered
exclusively by Da-Lite to assist the quiet controlled return of the
screen into the case.
You Have Made A Wise Selection…
in choosing a Da-Lite projection screen, designed and
engineered to produce the sharpest, most pleasing pictures with
maximum convenience.
Pull down on pull bail until desired picture area is obtained. Lock
into position as on a window shade. Be sure surface is locked
before releasing.
NOTE: This screen will not lock into position in the upper portion
of its travel.
The Model C operates on the same principle as a window shade.
Pull down about 4 inches to disengage the locking dog and start
the fabric up firmly and quickly.
Large picture surfaces are heavy and will start up too slowly to
prevent the locking dog from catching unless help is provided,
so keep picture surface moving briskly.
Should the locking dog catch, pull the picture surface down
about 4 inches and start the surface up rapidly.
The CSR feature of this screen will allow the screen to stop, as
normal, in the bottom portion of its travel. The screen will not
stop in the top portion of its travel, but will continue slowly and
gently into the case.
To view an online Model C with CSR retraction tutorial,
please visit http://www.da-lite.com/products/product_flash/
modelc_csr/.
1. Select fasteners of proper type for wall or ceiling involved.
2. Insert fasteners through proper openings provided in back side
of end caps.
3. Attach screen securely to studding or other solid surface - never
to plaster only.
4. MAKE SURE SCREEN IS MOUNTED LEVEL.
1. Heavy screw hooks may be installed into wood joists. Other
types of hooks or chain may be used for other ceilings or for
stage installations.
2. Insert hooks or chain through proper openings provided in
sides of end caps. Screen must hang so that flat back of case
is perpendicular to floor.
3. MAKE SURE SCREEN IS MOUNTED LEVEL.
Before re-rolling surface into case, examine both front and back
of surface to be sure they are free of foreign matter.