Da-Lite Model C with CSR - Manual (Page 3)

3
Suggested Methods Of Installation
For Wall
For Ceiling
Wall Mounted
Picture Surface
Picture Surface
Ceiling Hanging
Picture Surface
Use No. 6 Brackets
To Hang Behind
Beam Or Valance
Picture
Surface
Concealed
(Allow Room For Access)
Troubleshooting
Symptom Cause Solution
Screen is retracting too slowly.
Over 8 seconds retracting from
the bottom into the case.
The CSR adjustment is not correct.
Retract screen completely, and then rotate
CSR shaft 1/2 turn at a time counterclockwise.
Screen is retracting too fast.
Under 3 seconds retracting
from the bottom into the case.
The CSR adjustment is not correct.
Retract screen completely, and then rotate
CSR shaft 1/2 turn at a time clockwise.
Screen is retracting too slowly, and
then slams the case when adjusted
counterclockwise.
The CSR unit (shock absorber) is too strong.
Reset the CSR unit. Call Da-Lite (800-622-3737)
for detailed instructions.
Screen does not retract.
Retraction procedure*. Pull the screen down, and then retract firmly and quickly.
The CSR has been over adjusted
counterclockwise. The CSR unit is jammed. Reset or replace the CSR unit.
Call Da-Lite (800-622-3737) for detailed instructions.
The roller tube is bent and binding. Replace the screen.
Screen does not stay down.
Locking procedure.
Pull the screen down, and then slowly
retract until it locks.
Dog is not locking.
Retract screen completely, and then rotate
CSR shaft 1/2 turn counterclockwise.
*To view an online Model C with CSR retraction tutorial, please visit http://www.da-lite.com/products/product_flash/modelc_csr/