Da-Lite Automated Confidence Monitor Stand - Manual (Page 2)

2
Mobile Plasma Stand Automated Confidence Monitor MPS-ACM
Important Safety Instructions
Procedure
CAUTION: The user of this product should exercise caution
when moving the Mobile Plasma Stand. Any sudden stop could
cause instability of the stand and could cause serious injury and/
or damage. The stand should always be pushed, never pulled, by
the user. Always push from the side of the stand, never from the
front or back of the stand.
When using your video equipment, basic safety precautions should always be followed, including the following:
1. Read and understand all instructions before using.
2. Position the cord so that it will not be tripped over, pulled, or
contact hot surfaces.
3. If an extension cord is necessary, a cord with a current rating at
least equal to that of the appliance should be used. Cords rated
for less amperage than the appliance may overheat.
4. To reduce the risk of electric shock, do not disassemble this
appliance. Contact an authorized service dealer when repair
work is required. Incorrect reassembly can cause electric shock
when the appliance is used subsequently.
5. The use of an accessory attachment not recommended by the
manufacturer may cause a risk of fire, electric shock, or injury to
persons.
Save These Instructions
1. Remove contents from carton and examine for damaged or missing parts.
Required Tools:
- 7/16” wrench
- 9/16" wrench
- 3/16” allen wrench
- Phillips screwdriver