Danby DWC040A2BDB - Manual (Page 9)

OPERATING INSTRUCTIONS
THE CONTROLS OF
YOUR WINE COOLER
1
2 3
4
5
6
: Indicator light illuminates to signify the
cooling mode is currently in operation.
Window: For viewing the temperature of the
upper zone.
Window: For viewing the temperature of the
lower zone.
°C / °F: Indicates what scale the temperatures will
be displayed in.
T N A T R O P M I
l
1
2
3
4
5
6
Button : Used to set the temperature in the
upper zone (see ‘Setting the Temperature’ below).
Button : Used to set the temperature in the
lower zone (see ‘Setting the Temperature’ below).
To control the inner light turn ON/OFF.
Switch: Continuous illumination.
Switch: Illumination only when the door is
open.
T N A T R O P M I
I
O
SETTING THE
TEMPERATURE
IMPORTANT
In the event of a power
failure, wait 3 to 5 minutes
before restarting.
• To switch the display between the Fahrenheit (°F) and Celsius
(°C) scale, press the and control buttons simultaneously for
approximately fi ve(5) seconds.
• The temperature range can be set as low as 39°F (4°C) or as high
as 64°F (18°C) to suit your specifi c storage requirements. Each
press of the or button will allow you to adjust the
temperature in 1° increments within the aforementioned range.
6