Danby DWC93BLSDB - Manual (Page 5)

Installation Instructions
LEVELING
INSTRUCTIONS
It is important that your Wine Cooler is level. To level the Wine
Cooler:
1) Move the Wine Cooler to its final location.
2) Have someone gently lean on the front of the Wine Cooler to take
some of the weight off of the leveling leg.
3) Turn the leveling leg clockwise to raise, and counter-clockwise to lower
the Wine Cooler. Continue in this manner until the Wine Cooler is level.
DO...
• Select a location with a strong, level floor.
• Allow for 5 inches of space between the back of the appliance and any
adjacent wall.
• Avoid direct sunlight and heat. Direct sunlight may affect the acrylic
coating; heat sources nearby will cause higher electricity consumption.
DO NOT...
• Use this appliance outdoors: This appliance is intended for house-
hold use only. Do not attempt to operate or store this appliance outdoors.
• Build this appliance into an enclosure: This appliance is designed for a
Free-Standing application only and is not intended to be “Built-In”.
Extreme Weight Hazard! Use 2 or more people when moving the
Wine Cooler.
WARNING
LOCATION
5 In. 5 In.
4