Danby DWC93BLSDB - Manual (Page 8)

Operating Instructions
WINE STORAGE
The Maximum Capacity* of the DWC93BLSDB is 36 (750mL) wine
bottles. * When stocked as per instructions below.
In order to achieve the maximum storage capacity of thirty six (36) bottles,
it will be necessary to:
1) Position 5 bottles across, as in Fig. A.
2) Finally, position three (3) bottles per staggered bottom shelf, as shown
in Fig. B, for a total of six (6) bottles per tier on the bottom 2 tiered,
staggered shelf. This will give you a total loading capacity of 36 bottles.
Fig. A
Fig. B
To remove a rack from its locked position, lift the rear of the rack
upward and then slide the rack out from the unit, as shown in Fig. C.
To re-install, ensure the rack is resting securely on the support brackets,
and push the rack inward until it locks into place.
Do not cover any part of the rack with aluminum foil or any other
material that will prevent adequate air circulation within the unit.
IMPORTANT
Fig. C
SHELF
INSTRUCTIONS
7