Dillon Precision RF 100 - Manual (Page 6)

6
Primer Filler Parts List
Part # Description
13728 1/8” Short Arm Allen Wrench
13964 10-24x1/4”
14040 Hitch Pin Clip
17285 Feed Adapter, Large (red)
17286 Feed Adapter, Small (blue)
17293 Lexan Cover
17294 Stabilizer Plate, Small
17295 Stabilizer Plate, Large
17894 1/4-20x3 1/2” (Grade 8) Bolt
Part # Description
17898 Flat Nylon Washer
17900 Foam (Top And Bottom Set)
17902 Filler Tube, Large (red)
17903 Filler Tube, Small (blue)
17904 Box (W/ Label)
17953 1/4” Yellow Washer
All electrical/electronic components in
Dillon equipment are covered by a one
year warranty.
Parts Chart by
Primer Size
Primer Size: Small (All Types)
Stabilizer Plate: A - #17294
Colored Adapter: Blue - #17286
Primer Size: Large Pistol/Rifle
Stabilizer Plate: A - #17294
Colored Adapter: Red - #17285
Primer Size: Large Rifle Magnum
Stabilizer Plate: B - #17295
Colored Adapter: Red - #17285
#13728
#17285, large (red)
#17286, small (blue)
#17902, large (red)
#17903, small (blue)
#14040
#17898
#17295 (large)
#17294 (small)
Troubleshooting continued…
Problem: The machine ‘picks-up’ speed
during operation, or vibrates so violently
that primers are thrown out of the bowl.
Readjust as follows: tighten the screw that
holds the feed adapter ( Fig #7) until it
contacts the plastic feed adapter, then
back it off .040”, about the thickness of a
dime. If it continues to flip primers, back
this screw out in 1/4-turn increments,
testing after each adjustment.
The feed adapter is designed to float.
When allowed to move, the adapter
absorbs some of the vibration. When the
screw is too tight, all vibration transfers to
the bowl causing it to become violent
and throw primers out of the bowl.
RF 100 Primer Filler, May 2007 5/22/07 9:35 AM Page 6