Ditch Witch JT100AT - Manual (Page 187)

Service - 186
JT100/JT100 All Terrain Operator’s Manual
Service Precautions
CMW
©
Service Precautions
Working Under Drilling Unit
Before working under area of drilling unit supported by a cylinder, make sure drilling unit is parked on
hard surface.
1. Remove cylinder locks from storage at rear of pipe box.
2. Place over extended cylinder rods (shown) with curved ends toward rod ends of cylinders.
Replace cylinder locks or drill frame support if damaged.
Read operator’s manual. Know how to use all controls.
Your safety is at stake.
To help avoid injury: Unless otherwise instructed, all service should be
performed with engine off.
Crushing weight could cause death or
serious injury. Use proper procedures and equipment or stay
away.