Check supplies and prepare equipment, Check supplies – Ditch Witch JT100AT User Manual

Page 96

Advertising
background image

JT100/JT100 All Terrain Operator’s Manual

Prepare - 95

Check Supplies and Prepare Equipment

CMW

©

Check Supplies and Prepare Equipment

Check Supplies

•

receiver/transmitter or tracker with spare batteries

•

beacons with new and spare batteries

•

two-way radios with new and spare batteries

•

hydraulic wrench (see “Hydratong Wrenches” on page 165)

•

transition sub

•

anchoring equipment and accessories

•

bits, screens, nozzles (see “Downhole Tools” on page 160)

•

adapters, pipe, beacon housings

•

marking flags or paint

•

water and additional hoses

•

fuel

•

drilling fluid additives (see “Drilling Fluid” on page 152)

•

spare fuses

•

keys

•

backreamers, swivels, pulling devices (see “Backreamers” on page 162)

•

wash down hose and spray gun

•

duct tape

•

spray lubricant

•

tool joint compound (see “Recommended Lubricants/Service Key” on page 188)

•

electrically insulating boots and gloves. Boots must have high tops and meet the electric hazard
protection requirements of ASTM F2413 when tested at 14,000 volts. Tuck legs of pants completely
inside boots.

•

personal protective equipment, such as hard hat and safety glasses

•

notepad and pencil

Advertising
This manual is related to the following products: