Mixtures, Mr90 operator’s manual – Ditch Witch MR90 User Manual

Page 63

Advertising
background image

Systems and Equipment - 62

MR90 Operator’s Manual

Recommended Products

CMW

®

Mixtures

General mixing order

1.

Soda ash

2.

Bentonite

3.

Polymer

Bore-Gel

®

contains premixed bentonite, polymer, and soda ash. Follow guidelines below to ensure proper

drilling fluid viscosity for expected drilling conditions.

Basic Fluid Recipes

NOTICE: Bentonite does not mix well in water containing polymer. To use both, mix bentonite first, then
add polymer.

•

If chemicals are added in the wrong order, they will not mix properly and will form clumps.

•

If tank contains bentonite/polymer mix and more drilling fluid is needed, completely empty tank and
start with fresh water before mixing another batch.

Conditions

Amount to Use

normal drilling

15 lb/100 gal

7 kg/380 L

sand or gravel

up to 45 lb/100 gal

up to 21 kg/380 L

rock

up to 50 lb/100 gal

up to 23 kg/380

Soil type

Mixture/100 gal (378 L) of water

Notes

fine sand

35 lb (16 kg) Bore-Gel

coarse sand

35 lb (16 kg) Bore-Gel
.5 lb (225 g) No-Sag

Add .5 lb (225 g) of Quik-Trol for
additional filtrate control

fine sand below water
table

40 lb (18 kg) Bore-Gel
.75 lb (340 g) Quik-Trol

Add .5 - 1 gal (2-4 L) of Dinomul in high
torque situations

coarse sand below
water table

40 lb (18 kg) Bore-Gel
.75 lb (340 g) Quik-Trol
.75 lb (340 g) No-Sag

Add .5 - 1 gal (2-4 L) of Dinomul in high
torque situations

gravel

50 lb (23 kg) Bore-Gel
.75 lb (340 g) Quik-Trol
.75 lb (340 g) No-Sag

Add .5 lb (225 g) of Barolift to reduce loss
of returns

cobble

50 lb (23 kg) Bore-Gel
.75 lb (340 g) Quik-Trol
.75 lb (340 g) No-Sag

Add .5 lb (225 g) of Barolift to reduce loss
of returns

Advertising