Ditch Witch RT120 - Manual (Page 104)

RT120 Operator’s Manual
Trench - 103
Setup
CMW
1. If using optional trench cleaner, remove bolt installed for transport.
2. Fasten and adjust seat belt.
3. Start tractor. See page 84 for start-up procedures.
4. Drive to starting point. Move in line with planned trench. See page 86 for driving procedures.
5. Engage parking brake and verify parking brake indicator is on.
6. Move ground drive gear selector to position 1 and motor speed switch to low.
7. Turn seat to the desired position.
8. Engage axle lock.
9. Lower boom to just above ground.
10. Check that attachment speed/direction control is in neutral.
11. Check that boom is in line with planned trench.