Ditch Witch RT120 - Manual (Page 76)

RT120 Operator’s Manual
Operation Overview - 75
Digging with Backhoe
CMW
4. Begin drilling. See page 133.
5. Use drill string guide as needed. See page 134.
6. Add rod. See page 135.
7. Backream. See page 135.
8. Shut down tractor. See page 88.
9. Disassemble joints. See page 136.
Digging with Backhoe
1. Start unit. See page 84.
2. Set stabilizers and unstow backhoe. See page 124.
3. Excavate. See page 125.
4. Stow backhoe properly. See page 126.
5. Shut down tractor. See page 88.
Sawing
1. Start unit. See page 84.
2. Position tractor and controls. See page 138.
3. Begin sawing. See page 140.
4. Complete the installation. See page 151.
5. Backfill the trench. See page 152.
6. Shut down tractor. See page 88.
Leaving Jobsite
1. Backfill if necessary. See page 152.
2. Rinse equipment. See page 152.
3. Stow tools. See page 152.
4. Haul equipment from jobsite. See page 96.