Directed Electronics 881XP - Manual (Page 41)

38 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d
table of zones
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed in the following table, along with spaces to
write in any optional sensors or switches that have been installed.
ZZO ON NEE
(Number of
D DEEA ALLEER R--IIN NSSTTA ALLLLEED D
LED Flashes)
D DEESSCCR RIIP PTTIIO ON N O OP PTTIIO ON NSS
1 1
Instant trigger - hood pinswitch
2 2
Instant trigger - a heavier impact
detected by the shock sensor
3 3
Door switch trigger
4 4
Instant trigger - for optional
sensors
5 5
Ignition trigger
interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming
diagnostics. If you receive a Bypass notification when arming or
a Tamper Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks
by the LED.
➜
➜