Directed Electronics 881XP User Manual
Page 45
42
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d
p
prro
og
grra
am
mm
miin
ng
g rre
em
mo
otte
e c
co
on
nttrro
oll ffe
ea
attu
urre
ess
To enter programming mode
Press the Program button on the back of the remote or hold the four
remote control buttons on the front of the remote simultaneously until
one long beep is heard. Programming Mode has now been entered.
To exit programming mode
If no action is taken by the user within 5-seconds (button
pressed), programming mode will be exited.
Page notification (Beep or Vibrate)
Use
to toggle selections between Beep mode or Vibrate
mode.
Illumination (On or Off)
Use
to toggle selections between LCD backlight illumina-
tion On/Off.
Sensor icon selection (hood/trunk)
Use
to toggle display selections between hood only (1 beep),
trunk only (2 beeps), or hood and trunk (3 beeps) on the LCD
display. The installer will have set the remote up to correctly
display the installation (hood pin only, trunk pin only, or hood
and trunk pin installed).
➜
➜
➜
➜
➜