Dream Property Omikron Plus control DM8000 - Manual (Page 3)

EXIT
VOL BOUQUET
2 abc 1 3 def
5 jkl 4 ghi 6 mno
8 tuv
0
7 pqrs 9 wxyz
< <
TV R
PVR
EXIT
INFO
HELP
VOL BOUQUET
2 abc 1 3 def
5 jkl 4 ghi 6 mno
8 tuv
0
7 pqrs 9 wxyz
< <
TV R
MENU
REC TEXT RADIO TV
•••
programming
successful
••••••••••
error
•••••
exit
programming
Dreambox
remote control
TV remote
control
3 - 5 cm
PROGRAMMING USING THE LEARNING MODE
In this way of programming you can
basically make a carbon copy of your TV
remote control's functions onto your
Dreambox remote control. Only the DREAM-
Control and the TV-Control-Button cannot
be assigned a function.
1. Press the OK-Button and the TV-Control-
Button for approx. 3 seconds, until the
TV-Control-Button lights up red and the
blue illumination of the keys is active.
2. Press 888 on the Numeric Keypad to
activate the learning mode. The blue illu-
mination of the keys will turn off and the
TV-Control-Button will light up red.
3. Press the desired button that you want to
assign a function on your Dreambox remote
control (excluding the DREAM-Control and
TV-Control-Button).
The TV-Control-Button will shortly blink red
3 times and wait for a signal from the other
remote control.
4. Place the Dreambox remote control and
your TV remote control facing each other
with a distance of about 3-5 cm as shown in
the picture right.
5. Press the desired button on your TV
remote control for 2-3 seconds. Once the
signal has been received, the red illumina-
tion of the TV-Control-Button will disap-
pear and blink 3 times afterwards if the
programming was successful or 10 times if
an error occured. You can let go of the
button now.
6. Repeat the process from step 3. if you
want to program another button or if an
error occured.
7. Press the TV-Control-Button to exit the
learning function. The button will blink 5
times and the illumination will disappear.
Please note:
• The programming will be aborted if
you don't complete step 2 within 3 seconds.
• The programming will be aborted if you
don't complete step 5 within 6 seconds.
• Pressing the TV-Control-Button at any
time will exit the learning function.
DREAMBOX-MODE AND TV-MODE KEY ILLUMINATION TECHNICAL DATA
Dreambox-Mode
Press the DREAM-Control-Button to activate
the remote's Dreambox-Mode.
Make use of the two DIP switches in the
battery compartment if you want to use
more than one Dreambox in a room.
In order to e.g. steer a DM8000 HD PVR,
both DIP switches must be brought into the
position „12“.
TV-Mode
Pressing the TV-Control-Button will put your
remote into TV-Mode using the most
recently entered code. You can now use the
Dreambox remote control instead of your TV
remote control to control your TV.
• Pressing the DREAM-Control-Button will
make it light up red for 3 seconds. The
illumination will disappear right away when
you press another button in this duration.
• Pressing the TV-Control-Button will
make it light up red for 3 seconds. The
illumination will disappear right away when
you press another button in this duration.
• Pressing any other button (except
DREAM-/TV-Control-Button) will activate
the blue illumination of the keys for 10
seconds.
Dimensions: 19,5 x 5,5 x 2 cm (L x B x H)
Weight: 130g (without batteries)
Batteries 3x AAA
03/03 DREAMBOX REMOTE CONTROL | DREAM MULTIMEDIA GMBH | PIERBUSCH 24-26 | 44536 LÜNEN | GERMANY
HOTLINE +49 (0) 180 . 3 44 11 30 990 (0,09 €/Min.)
TV R
PVR
INFO
HELP
TV R
MENU
2 abc 1 3 def
5 jkl 4 ghi 6 mno
8 tuv
0
7 pqrs 9 wxyz
< <
2 abc 1 3 def
5 jkl 4 ghi 6 mno
8 tuv
0
7 pqrs 9 wxyz
< <