Echelon LonPoint Module - Manual (Page 18)

2-8 LonPoint Modules and Base Plates
The Type 1D DIN Base Plate may be mounted to either a 35mm DIN rail or to a wall
panel (figures 2.8). A jumper plug supplied with the Base Plate permits the power and
network connections of several Type 1D DIN Base Plates to be interconnected without
additional wiring.
Figure 2.8 LonPoint Interface Type 1D Base Plate Mounting Configuration
Prior to installing the base plate, it is important to understand the symbology used on
the base plates, interface modules, and router modules.