Echelon LonMaker - Manual (Page 348)

332 Appendix A - Setting LonMaker Default Options
The LNS Event category contains the following options. The changes you make in the LNS Events
options category are all applied to the current network on your computer.
Device/router
Commission and
Attachment Events Updates the LonMaker drawing when devices or routers are attached to
the network, detached, commissioned, or decommissioned. This
option is selected by default.
Scope: Current network, current LonMaker computer
Device Interface
Change Events Updates the LonMaker drawing when a device’s functional blocks,
network variables, or configuration properties are added, removed, or
modified. This option is selected by default.
Scope: Current network, current LonMaker computer
Connection Change
Events Updates the LonMaker drawing when a connection is created or
modified, or when a connection description template being used in
your network is modified. This option is selected by default.
Scope: Current network, current LonMaker computer
Device/router
Change Events Updates the LonMaker drawing when new devices or routers are
detected. This option is selected by default.
If selected, a device will be automatically upgraded when a new
application is loaded into a device or when a device is replaced. The
LonMaker tool will automatically make the device compatible with the
updated device template, and it will maintain existing compatible
connections and configuration property settings.
Scope: Current network, current LonMaker computer
Subsystem Change
Events Updates the LonMaker drawing when subsystems are added, removed,
or modified. This option is selected by default.
Scope: Current network, current LonMaker computer
Device Template
Change Events Updates the internal copies of device templates maintained by the
LonMaker tool when device templates are added, removed, or
modified. This option is selected by default.
Scope: Current network, current LonMaker computer
Channel Change
Events Updates the LonMaker drawing when channels are added, removed, or
modified. This option is selected by default.
Scope: Current network, current LonMaker computer
LonMaker Font Options
The LonMaker Font options category lets you adjust the font and the size of the LonMaker Design
Manager and the dialogs in the LonMaker drawing. This is useful in the event you need to re-size
dialogs that have become truncated, which may occur if you are using an Asian version of Windows.
Otherwise, you will not likely need to change the settings in this options category.
To apply changes in the LonMaker Font options category to the LonMaker Design Manager, exit and
then re-open the LonMaker Design Manager.
The changes you make in the LonMaker Font options category are applied to all networks on your
computer.