Echelon LonMaker - Manual (Page 81)

LonMaker User’s Guide 65
c. Select the LNS Network Interface or an IP-852 Network Interface you want to use to connect
to the L ON W ORKS channel. The LNS Server or remote client is attached to an IP-852 channel
using an IP network interface, such as an Ethernet network interface card (NIC) or a modem
channel with PPP software. The network interface to the L
ON W ORKS channel must be
defined and configured before opening an existing LonMaker network on a remote full client.
Click OK. The LNS Server dialog appears.
d. The LNS Server dialog displays the status for the open network. For more information on
using the LNS Server, open the Help menu and click LNS Server Help to view the LNS
Utilities Online Help System file.
e. To open an additional network, click Launch LNS Server on the LonMaker Design
Manager. The LNS Server window appears. Highlight the next network to open. Click Open
Network. The Network Interface page appears. Select the network interface. Click OK.
Repeat this process for each additional network you want to open.
3. Copy the LonMaker backup file that you created in step 1 to the remote client.