Echelon Mini EVK - Manual (Page 11)

7. Click Install to begin the installation. When the installation has
completed, a window appears to notify you. Click Finish to exit the
installation wizard.
8. If you do not have an Adobe Acrobat reader, you can install it by selecting
Install Adobe Acrobat Reader in the Install Products windows
described in step 2.
9. If you are using a PCC-10, PCLTA-10, PCLTA-20, or PCLTA-21 interface
instead of the U10 or U20 USB interface included with the Mini EVK,
you can install a driver for these interfaces by selecting the Install the
PCC-10/PCLTA-10/20/21 Drivers software from the Install Products
window described in step 2.
Document Roadmap
The remainder of this document describes how to develop Neuron C applications
for L
ON
W
ORKS
devices with the Mini EVK, and how to download those
applications into the evaluation boards and test them. It also describes how to
use the Neuron C and C# example applications included with the Mini EVK
software. This content is divided into the following sections:
• Chapter 2, Using the Mini Application. This chapter describes how to use the
Mini Application to create or modify a Neuron C application, build an
application image, and then download the application image into a device.
This chapter also describes how to use the Mini Application to reset, wink or
test a device.
• Chapter 3, Using the Mini EVK Example Applications. The Mini EVK
includes several Neuron C example applications you can download into the
evaluation boards, as well as the C# Monitoring & Control Example
Application, which is a C# application you can use to monitor your evaluation
boards from your computer. This chapter describes these applications.
• Chapter 4, Developing a Neuron C Application. This chapter introduces the
Neuron C Version 2.1 programming language. It describes the basic aspects
of the language and provides an overview of how you can use the L ON W ORKS
platform and the Neuron C programming language to construct interoperable
devices and systems.
• Chapter 5, Debugging a Neuron C Application. This chapter describes how to
use the boards and accessories included with the Mini EVK, or additional
tools such as the LonMaker Integration Tool or NodeBuilder Development
Tool, to debug a Neuron C application.
• Appendix A, Troubleshooting. This appendix describes how to resolve
problems that may occur when you use the Mini EVK with the evaluation
boards.
• Appendix B, Monitoring & Control Application Overview. This appendix
describes the Monitoring & Control Example Application.
Mini EVK User’s Guide 5