EMM Labs DAC8 MKIV - Manual (Page 14)

13
Additional selection for RAW DSD or SDIF-3 format for DSD input can be
made with the interface format switch. The overampling switch needs to be
set to the sample rate (64FS or 128FS) of the DSD input data.
“Empty” switch positions are ignored.
Conversion from DSD on Optical to Analog
In this mode an additional conversion from DSD on optical input to DSD on
BNC output can be performed. For this the BNC-DIR switch needs to be set
to OUT, the IF FORMAT switches to either RAW DSD or SDIF-3 and to DSD.
“Empty” switch positions are ignored.
64
128
DSD
PCM SDIF-3
BNC
XLR
OPTIC
WIRE
DSD
PCM
IN
OUT
BNC-DIR WIRE BNC
IF FORMAT DIGITAL AUDIO INPUT
1 FS
2 FS
44.1
48
PCM BASE
SAMPLE RATE
INT
EXT LOCK POWER ERROR
RAW DSD
CLOCK
BNC OUT OVERS