Eurocom R130T ELEMENT - Manual (Page 152)

Modules & Options
7 - 48 3.75G/HSPA Module
7
3G Watcher Application
With the 3.75G/HSPA module and USIM card (provided by your service provider)
installed you may then install the 3G Watcher application. The 3G Watcher appli-
cation allows you to directly access your 3.75G internet service from the computer.
3G Watcher Application Installation
1. Enable power to the module by pressing the Fn + key combination (the
on screen icon will indicate the module’s power status).
2. If a Found New Hardware window appears, click Cancel.
3. Click Option Drivers (button).
4. Click 2.3.5G Generation Module > Yes, and then click Next.
5. Click the button to accept the license agreement, and then click Install.
6. When the next screen appears wait (for about 2 minutes) until you see the
message “Your devices are ready to use” in the taskbar before clicking
Finish (this allows the hardware to detect the 3.75G module).
7. Access the 3G Watcher application from the Start menu (Start > Pro-
grams/All Programs > Sierra Wireless > 3G Watcher), or by double-
clicking the desktop icon
.

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + key com-
bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see
Table 1
- 3, on page 1 - 11 / Table 1
- 2, on page 1 - 9 ).