Eurocom R130T ELEMENT - Manual (Page 271)

Windows XP Information
3.75G/HSPA Module D - 63
D
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
key combination (see “Function Keys
& Visual Indicators” on page D - 5 ) to toggle power to the 3.75G/HSPA module.
When the 3.75G/HSPA module is powered on, the indicator will briefly be dis-
played. Make sure you install the drivers in the order indicated in Table D - 3, on
page D - 29 . Note that exiting the application does NOT turn off the 3.75G/HSPA
module.
• 3G Watcher - See “3G Watcher Application Installation” on page D - 64 for
driver installation information and “Setting Up a Carrier Profile” on page 7 - 49
for instructions on using the 3G Watcher application.
• HSPA Modem Interface - See “HSPA Modem Interface Installation” on
page D - 65 for driver installation information and “HSPA Modem Interface”
on page 7 - 56 for instructions on using the HSPA Modem Interface.
• Mobile Partner - See “Mobile Partner Application Installation” on page D -
66 for driver installation information and “Mobile Partner Application” on
page 7 - 65 for instructions on using the Mobile Partner application.

3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.