Eurocom W150ER FOX 4.0 - Manual (Page 201)

Modules
3.75G/HSPA Module 7 - 63
7
3.75G/HSPA Module
If you have included an optional (for Model A Only) 3.75G/HSPA (High Speed
Packet Access) module (see
“Communication” on page D - 5 for specification de-
tails) in your purchase option, you will have the appropriate application provided for
your module (Wireless Manager). Follow the instructions on page
7 - 64 to install
the USIM card (which will be provided by your service provider), and then install
the application.

3.75G Module Power
Note that when the com-
puter resumes from a
power saving state, is
restarted or starts up af-
ter shutdown, the 3.75G
module will be powered
off.

Important Notice - 3.75G/HSPA & Bluetooth/Wireless LAN Modules
In order to comply with FCC regulations you should NOT operate the 3.75G/HSPA module
and the Bluetooth/Wireless LAN modules at the same time as this may disrupt radio fre-
quency, and cause interference. When the 3.75G/HSPA module is powered on, make sure
that the Bluetooth/Wireless LAN modules are powered off.