Eurocom D900K F-Bomb - Manual (Page 58)

Power Management
3 - 8 Configuring the Power Button
3
Configuring the Power Button
The power button may be set to send the computer in to either Stand by or
Hibernate mode. In Stand by mode, the LED
will flash green. In Hi-
bernate mode the LED will be off. If you are in a power saving mode set to
save power through individual components (e.g. hard disk, monitor), the LED
will remain green.
Figure 3 - 3
Power Options
(Advanced - Power
Buttons)
(Sleep) Button

Sleep Button
You may also configure the Sleep/Resume key combination (Fn + F4) from the
menu illustrated in
Figure 3 - 3 . In Windows this is referred to as the Sleep button.
Power Button Sleep/Resume Lid