Eurocom D900K F-Bomb - Manual (Page 97)

Upgrading The Computer
Upgrading the Hard Disk Drive(s) 6 - 5
6
4. Release the cable and lift the hard disk assembly up out off the
computer.
5. Remove screws - in order to separate the bracket from the hard
disk(s), and disconnect the cable (see sidebar).
6. Reverse the process to install a new hard disk(s).
6 7

Hard Disk Cable
The computer sup-
ports both serial (SA-
TA) and parallel
(PATA) hard disks.
Make sure you use the
appropriate cable
for the particular hard
disk(s) you use.
Only serial (SATA)
hard disks (pictured)
support a RAID config-
uration.
Figure 6 - 3
HDD Assembly
Removal
16
8 15
16
6
7
8
9
10
16
11
13
12
15
14