Eurocom M570TU Montebello - Manual (Page 162)

NVIDIA Video Driver Controls
B - 12 Enabling TV Display
B
Enabling TV Display
To display desktop images on a TV, connect the TV to your computer by using an
HDMI cable/DVI cable from the TV to the HDMI-Out port/DVI-Out port at the rear
of the computer.
You will need to enable the TV display from the NVIDIA Control Panel as per the
instructions on
B - 5 . The TV will appear as a display option (2. Select the displays
you would like to use.) when attached to the HDMI-Out port/DVI-Out port Apply
the settings, and then click Yes to save the changes.

Detect Displays
To get a full range of dis-
play options click “My dis-
play is not shown in the
list...”.
HDMI Audio Setup
See “HDMI Audio Con-
figuration” on page B -
7
for instructions on con-
figuring audio for HDMI
display devices.
Set up your external dis-
play (TV or LCD) for
HDMI input (see your
display device manual).
Figure B - 9
Change Display
Configuration
(with TV connected)