Eurocom M980NU XCaliber User Manual
Page 132
Modules
7 - 14 RAID Setup
7
Synchronizing the Array
1.
Run the Nvidia control panel from Start > Programs/All Programs > NVIDIA
Corporation > NVIDIA Control Panel > Storage (choose Advanced or Standard).
2.
Click Storage from the left window.
3.
Click on Synchronize Array and then click Next and a wizard will take you
through the necessary steps.
4.
Click to select the RAID and click Next.
5.
The Completing the NVIDIA Synchronize Array Wizard will appear and you can
click Finish to begin the process.
6.
A Synchronization Started pop-up balloon will appear in the taskbar as the
synchronization progresses.
7.
A Synchronization Finished pop-up balloon will appear in the taskbar when the
rebuild finishes.
8.
You can also check the synchronization status from the View Storage
Configuration page in the NVIDIA Storage Control Panel (see